previous Roll Bar Main Pads Fitment Weld Paint Install next
Paint

I wiped the roll bar with rubbing alcohol to remove grease. It took a fair amount of work to remove some old tape from the stays (the stays were cut out of an old roll bar). I gave everything a light sanding, and wiped with rubbing alcohol again. I primered and then painted. I have been very pleased with the durability of the paint. My backseat gets daily use, and so far the paint is holding up great.



Keywords: Camaro, Firebird, LT1, LS1, autocross, road racing, SCCA, NHRA, drag racing, safety, roll bar, welding, racing rules

previous Roll Bar Main Pads Fitment Weld Paint Install next